Client Login(opens in a new tab) Staff Login(opens in a new tab)
Cameron Facilities / Building Management Perth / BMS and Building Monitoring
SiteIQ Building Monitoring

Building Management System (BMS) Monitoring and Integration in Perth

We are introducing SiteIQ Building Monitoring for strata, commercial and FIFO camp buildings across Perth and regional WA. It will connect your building management system and plant to SiteIQ, our management system, so alarms reach our building management team straight away and every fault is tracked through to repair by a licensed contractor.

Technician checking the pressure gauge on a water booster pump set in a Perth apartment building plant room, with the pump control cabinet on the wall
Remote plant monitoring

Smart building monitoring in Perth for strata, commercial and camp buildings

Most buildings already hold the data that warns of a failure: a pump that runs too long, a hot water unit that loses temperature, a chiller that trips, a meter that climbs overnight. Too often nobody is watching it. SiteIQ Building Monitoring will bring that data into one building monitoring system, so our team sees the fault first and acts on it, rather than hearing about it from a resident or tenant.

This will be IoT building management with a building management team behind it, working alongside our building management and facility maintenance services. The team that monitors your building will raise the work order, manage the contractor and keep the record, so you have one point of contact from alarm to close out.

Read only by design

SiteIQ Building Monitoring will watch and alert. Control of your plant stays with your BMS and your licensed contractors, and fire systems stay with your fire contractor.

Plant and equipment monitoring

What we monitor: HVAC, hydraulics, pumps, lifts, energy and leaks

Monitoring will cover the plant and equipment that causes the most disruption when it fails without warning.

HVAC and mechanical plant

Chillers, air handling units, packaged units and ventilation fans: run status, faults, temperatures and run hours.

Hydraulic and pump monitoring

Domestic water booster pumps, hot water plant, sump, stormwater and sewer pumps: run and fault status, pressure and temperature.

Lift status monitoring

Running and fault status, where your lift contractor allows the connection. The lift contractor keeps responsibility for the lift.

Energy and utility metering

Electricity, water and gas meters read remotely by building, floor or plant item, so unusual use shows up early.

Leak detection

Point sensors and leak detection cable in plant rooms, risers, basements and under tanks.

Security system status

CCTV cameras and access control panels reported online or offline. Device status only, never footage.

BMS integration

BMS integration and open protocols: BACnet, Modbus, MQTT and vendor APIs

For BMS integration in Perth buildings, we will connect to your existing building management system, working with your BMS contractor, rather than replace it. A small IoT gateway in the plant room or communications cupboard will read the BMS and plant controllers over the open protocols the building automation and controls industry relies on.

  1. BACnet

    The open standard most building automation systems use to share data, read from the BMS head end or from individual controllers.

  2. Modbus

    Common on pump controllers, energy meters, hot water plant and older equipment.

  3. MQTT

    A lightweight messaging protocol used by modern IoT sensors and gateways.

  4. Vendor APIs

    Where a manufacturer offers an online connection to its equipment, we will use it.

Retrofit for existing buildings

BMS retrofit for existing buildings with IoT gateways and sensors

Many Perth apartment blocks and older commercial buildings have no BMS, or one that nobody can read. They do not need a new control system to be monitored. We will fit add on IoT sensors to the plant that matters most: a current sensor on a pump, a temperature probe on a hot water unit, a leak cable along a plant room floor. Each sensor will report through the gateway into SiteIQ.

The gateway will send data out over its own mobile connection, not through your building or resident networks. A licensed electrician will carry out the installation, and your existing plant will keep running as it does today.

Alarm management and escalation

From alarm to automated work order to repair

Every alarm will follow the same five steps.

  1. Alarm

    SiteIQ detects a fault, or a reading outside the limit agreed with you, and logs the time.

  2. Escalation

    Our team is notified straight away. After hours, alarms go to our 24 hour help desk, and an alarm not acknowledged escalates to the next person on the call list.

  3. Work order

    A work order is raised automatically against the asset in your register, with the alarm history attached.

  4. Contractor

    We call your nominated licensed contractor and authorise attendance within the spending limit your council or owner sets.

  5. Close out

    The contractor's report and photos are logged against the asset and the alarm is closed.

Condition monitoring and reporting

Condition monitoring, predictive maintenance and compliance reporting

Run hours, starts, temperatures and fault history show how each item of plant is ageing. That condition monitoring data will feed your preventive maintenance schedule and help us recommend predictive maintenance: servicing a pump whose daily run time is climbing before it fails, rather than after.

Each monitored item will be linked to its line in your asset register and your 10 year maintenance plan, so repairs and replacements are planned on evidence. Your council or asset manager will see dashboards and analytics for the building in the SiteIQ client portal: alarm history, energy and water use, open work orders and compliance reporting in one record.

Cameron Facilities building manager reviewing building reports on a tablet with a client in a Perth apartment lobby
Who it suits

Strata building monitoring, commercial buildings and FIFO camps

Strata and apartment buildings

Councils of Owners and strata managers who want to hear about a failed pump from us, not from a resident, with a clear record behind every levy decision. See strata building management.

Commercial buildings

Owners and asset managers who want plant watched between visits, energy use visible and every repair on record. See commercial building management.

FIFO camps and remote sites

Villages where plant runs day and night and the nearest technician may be hours away. See mining and remote camp facilities management.

BMS maintenance and retrofit Perth

How we work with your BMS, mechanical and lift contractors

SiteIQ Building Monitoring will sit alongside the contractors who already look after your plant. Your BMS and controls contractor keeps maintaining and programming the BMS, your mechanical, plumbing and lift contractors keep their equipment, and your fire contractor keeps testing and certifying the fire system. What will change is that faults will reach us sooner and arrive with the history the contractor needs to diagnose them.

Where a BMS needs maintenance, an upgrade or a retrofit, we will scope the work, obtain quotes from licensed contractors and manage the work on behalf of the strata company or owner, together with our HVAC maintenance, plumbing maintenance and essential services maintenance.

Compliance and standards

Laws and standards this service works within

Links open the official legislation page. These references describe the framework this service works within. They help owners, operators and managers meet their own obligations; they do not replace them or legal advice.

Certified to ISO 9001, ISO 14001 and ISO 45001 for the provision of integrated facility management services, including cleaning, maintenance and building administration; village accommodation and mining camp management; asset register and building compliance management; and project delivery services. Members of the Strata Community Association (WA) and the Facility Management Association of Australia.

ISO 9001 certifiedISO 14001 certifiedISO 45001 certifiedJAS-ANZ accredited certification
Questions

BMS monitoring: common questions

Does my building need a BMS to be monitored?

No. Where there is a BMS we will connect to it over BACnet, Modbus or the manufacturer's own connection. Where there is none, we will fit IoT sensors to the plant that matters most.

Can SiteIQ change how my plant runs?

No. SiteIQ Building Monitoring will be read only. It will watch and alert, and your BMS and licensed contractors keep full control of your plant and its settings.

What about the fire system?

Fire panels, sprinklers and fire pumps stay with your licensed fire contractor, who tests and certifies them.

Who sets the alarm limits?

We will agree each limit with you at setup and review it with you after the first month.

Who is responsible for the repair?

The strata company or owner keeps its duty for the building. We will call your nominated licensed contractor, authorise attendance within the spending limit you set, and track the job through to completion.

Is the connection secure?

The gateway will send data out to SiteIQ over its own mobile connection, not through your building or resident networks, and will be set up to read values only, with no write access to your BMS. CCTV and access control will report device status only, never footage.

How is building monitoring priced?

It will be priced per building: a setup fee for the site survey, gateway, sensors, installation and configuration, then a fixed monthly fee for monitoring, alerts and work orders. We will give you a fixed price once we have walked the plant room.

What do you need from us to start?

Whatever you hold of the asset register, 10 year plan, operation and maintenance manuals and as built drawings, then a walk through the plant room with your building manager or caretaker. We will work from what you have.

Book a plant room walk

Send us what you have on your building's plant and we will walk the plant room with you, then recommend what to connect and give you a fixed price. Use the enquiry form below or call 08 6154 0910. Cameron Facilities, Mount Lawley, Perth WA.

Talk to Cameron Facilities

Tell us about your site and what you need covered. Integrated facilities management across Perth and regional Western Australia, from a single building to a whole portfolio. Send this and a person will come back to you.

Prefer to talk it through? Call 08 6154 0910 or email [email protected].